陳夏宗 Shia-Chung Chen
- 中原大學機械系 / 教授
- 中原大學智慧製造中心 / 主任
- 美國西北大學材料科學博士
- shiachun@cycu.edu.tw
- 高分子加工
- 智慧射出成型雲端服務系統
- 先進成型技術
- Shia-Chung Chen, Yan-Xiang Liang, Chi-Je Ding, Yu-Hung Ting , “Experimental Study on the Modified P–V–T Model to Improve Shrinkage Prediction for Injection-Molded Semi-Crystalline Polymer” , 2026 , Polymers , vol.18 , p.349-365.
- Shia-Chung Chen; Chao-Yuan Gan ; Yan-Jun Liu ; Ching-Te Feng , “Investigation of the Foaming Morphology of Polypropylene Molded via Microcellular Injection Assisted by Water Vapor and Gas Counter Pressure” , 2025 , Polymers , vol.17 , p.611-623.
- Yogi Hendra Agustion; Shia-Chung Chen; Ching-Te Feng; Bermawi Priyatna Iskandar , “High-Quality Foaming and Weight Reduction in Microcellular-Injection-Molded Polycarbonate Using Supercritical Fluid Carbon Dioxide under Gas Counter Pressure” , 2024 , Polymers , vol.16 , p.2674-2691.
- Shia-Chung Chen; Bi-Lin Tsai; Cheng-Chang Hsieh; Nien-Tien Cheng; En-Nien Shen; Ching-Te Feng , “Prediction of Part Shrinkage for Injection Molded Crystalline Polymer via Cavity Pressure and Melt Temperature Monitoring” , 2023 , Applied Science , vol.13 , p.9884-9903.
- Zhe-Wei Zhou,Yu-Hung Ting, Wen-Ren Jong,,Shia-Chung Chen, and Ming-Chien Chiu , “Development and Application of Knowledge Graphs for the Injection Molding Process” , 2023 , Machines , vol.11 , p.271-286.
- Shia-Chung Chen, Jibin Jose Matthew, Cheng-Chang H, Ching Te F , “Improving the Moisture-Induced Part Qualities by Optimization of 0010 Plasticization and Processing Parameters of Injection Molding” , 2022 , Academ Journal Polymer Science , vol.5 , p.0-0.
- Shia-Chung Chen, Ming-Yuan Jien,Chi-Chuan Hsu, Shyh-Shin Hwang, and Ching-Te Feng , “Processing Effects on the Through-Plane Electrical Conductivities and Tensile Strengths of Microcellular-Injection-Molded Polypropylene Composites with Carbon Fibers” , 2022 , Polymers , vol.14 , p.3251-3264.
- Yung-Hsiang Chang, Shia-Chung Chen, Yu-Hung Ting, Ching-Te Feng, and Chi-Chuan Hsu , “The Investigation of Novel Dynamic Packing Technology for Injection Molded Part Quality Control and Its Production Stability by Using Real-Time PVT Control Method” , 2022 , Polymers , vol.14 , p.2720-2736.
- S. C. Chen, K. H. Lee,C. W. Chang, T. J. Hsu, and C. T. Feng , “Using Gas Counter Pressure and Combined Technologies for Microcellular Injection Molding of Thermoplastic Polyurethane to Achieve High Foaming Qualities and Weight Reduction” , 2022 , Polymers , vol.14 , p.2017-2032.
- Shia Chung Chen, Jibin Jose Mathew, Hariyanto Gunawan, Chun-Wei Huang, and Ching-Te Feng , “An Investigation to Reduce the Effect of Moisture on Injection-Molded Parts through Optimization of Plasticization Parameters” , 2022 , Applied Science , vol.12 , p.1410-1428.